TFT Display Konnwei Scan Tool OBD2 Scanner Tool For VW/Audi/Seat
Full System
KW450 is a car diagnostic tool for Vag. It supports full
system(Engine, transmission, abs brake, srs airbag) for VW/AUDI. It can
read/erase fault code, read live data, BAT check, oil reset, EPB
reset and so on.
| Item type | KW450 fault code reader |
| Display | TFT color display |
| Operating Temperature | 0 to 60°C (32 to 140 F° ) |
| Storage Temperature | -20 to 70°C (-4 to 158 F° ) |
| Dimensions(L,W,H) | 199 x 105 x 38 mm |
| Weight | 0.5kg |
| Housing material | ABS |
| Chip | Imported STM32F103VCT6 |
| Support system | XP WIN7 WIN8 WIN10 |
| Housing Color | Black |
| Support protocols | CAN, J1850 VPW, J1850 PWM, ISO 9141, KWP2000, SAE J1850 |
Function:
1) Read Codes
2) Erase Codes
3) Live Data
4) View Freeze Frame
5) I/M Readiness
6) O2 Monitor Test
7) On-Board Monitor Test
8) Component Test
9) Vehicle Info
10 ) BAT Check
11 ) Modules Present
12 ) DTC Lookup
13 ) Review Data
14 ) Print Data
15) Oil Reset
16) EPB Reset
....
KW450 obd scanner obd2 Vehicle Coverage:
It is for vw, audi, seat, skoda full system. The scan tool is
specially designed to work with all OBD II compliant vehicles,
including control area network (CAN), it is required by EPA that
all 1996 and newer vehicles (Cars and light trucks) sold in the
united states must be OBD II compliant and this includes all
american, asian and European vehicles.
VWDiagnose
This function is specially designed to diagnose the 101 electronic
control systems of a single vehicle Model
Common controlunit
This function is a common control system fault code , data stream
and version reading, and clear fault code.
All controlunit
This function is all control system fault code , data stream and
version reading, and clear fault code.
System controlunit
This function is to scan the common system one by one and read if
there is a fault and display
Gatewayscan
This gateway can quickly scan the ECU of the vehicle (some vehicles
have their own gateway system, tool can get the ECU information of
the vehicle by talking with the gateway which ECU is supported and
whether there are a fault)
Update Method:
To update your tool, you need the following items.
1. scan tool
2. A PC or laptop with USB ports
3. USB cable
1) Download the applicationUPlink.exefrom our website:
www.konnwei.com
2) Run UPlink.exe in your computer(Mac iOS and Linux does not
compatible)
3) Pressany button until the USB cable is connected with computer
and release it after the tool display a message“Update mode"
4) Open the UPlink software, click "Check Update" button, will
download the upgrade file from the internet then update to tester
tool
5) Wait for few minutes until update succeed
6) After the update is completed, restart tester tool finish the
whole updateSee bellow:
NOTE: when you made a wrong choice and the tool is unable to work
properly, you may need to update the programs. Keep holding any key
on the tool for a long time, and then Connect the tool to the
computer via a USB at the same time, USB cable will force the tool
into update mode to refresh the program.
Packing List:
1*KW450 obd obd2 scanner
1*User's Manual in English
1*OBD2 Cable
1*USB Cable
1*Protective Polyester Bag
More pictures of KW450 OBD2 Scanner Codes
